Read More: Catalog bolts

Where are shear studs applied?

The shear connector is suitable for the surface of the steel beam, and the penetration welding of the steel beam and the steel bearing plate. The connection between steel and reinforced concrete in composite beams generally uses shear nails.

The shear stud welding name of the shear connector stud is the welding stud, which belongs to a fastener with high strength and rigidity. The nominal diameter is Ф10～Ф25mm.

The total length before headed shear stud is 40-300 mm.

The headed shear stud has the manufacturer’s identification mark made of embossed characters on the top surface of the head, and the welding stud has a wide range of uses.

The common thickness of the light steel structure of the floor deck is 0.8mm, 1.0mm, 1.2mm, and 1.5mm is used when the load is large. Usually, shear welding are used to connect the steel beams, a small amount of steel bars are used in the slab, and the concrete layer is poured on it. , the total thickness is about 100-200mm.

What are the common materials of shear connector?

The shear connector stud material generally adopts SWRCH15A, ML15AL or ML15, (ML means riveting screw steel, cold heading steel is a part of riveting screw steel, so the symbol of riveting screw steel is also used), cold heading or Hot punching production, processing and inspection, all indicators are in line with the national standard GB10433-2002.

Strength factory shear studs

shear connector workshop real shot