The NO.4 Factory
HEBEI Matrix power Co., Ltd. covering 270000㎡, owing staff more than 300 staffs. This factory mainly producing photovoltaic bracket and refining wire rod.
Photovoltaic bracket
Monthly capacity is about 10000tons.
Ground-fixed single-pole system
System Overview
The around photovoltaic support system is mainly made of carbon steel. and the surface is treated with hot-dir
galvanizing or magnesium-aluminum-zinc plating, which has good stability, formability and corrosion resistance.The
ystem is suitable for installation in centralized
stations. The main body is fixed with cement. The structural desigl
ensures the strenath of the svstem while takina into
account fexibilitv and cost performance. It is compatible wit
different photovoltaic modules on the market
Product advantages
Unique design
The system uses C-shaped columns to be driven into the ground, or cement is poured withou additional foundation installation. The structure has strong adaptability and can be installed in a variety of soils and slopes.
Stable structure
The structure made of carbon steel is hard and stable and has strong corrosion resistance
Flexible adjustment
The structural design is simple, and the installation angle can be flexibly adjusted to further increase the lighting time of the components
Pre-assembled components
Most components are pre-assembled before leaving the factory and only need to be spliced which reduces the difficulty of on-site installation, saves time and cost, and improves cost performance
| Product name | ground-fixed single-pole system FX-GS I |
| Installation Location | Desert, plain, mountain |
| Installation angle | 60° |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement pouring |
| Bracket material | Hot-dip galvanizing, zinc aluminum magnesium |
| Applicable life | 25 years |
Ground-fixed double-pole system
System Overview
This product is suitable for installation areas with higher reaquirements for wind and snow resistance. It has a high degree of pre-installation characteristics. The bracket system can be adjusted in the front and rear, left and right and up and down directions lt is suitable for the installation of medium and large photovoltaic power stations Professional structural design On the premise of ensuring system strength, it effectively improves the timeliness of project installation and greatly reduces installation costs.
Product advantages
Highly pre-assembled to save installation time
There are few installation spare parts, and it is highly pre-assembled in the factory. Noon-site cutting or drilling is required, which reduces the difficulty and construction time of on-site construction and greatly reduces the project cost.
Flexible adjustments on site
Industry-leading professional design according to the terrain adjustment design can realize vertical east-west, southwest and north-south adjustment, simplify installation, and maximize photovoltaic power generation.
| Product name | Ground-fixed double-pole system FX-GD I |
| Installation Location | Desert, plain, mountain |
| Installation angle | 0-45° customized |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement pier, cement pouring, spiral ground pile |
| Bracket material | Hot-dip galvanizing, zinc aluminum magnesium |
| Applicable life | 25 years |
Flat single-axis tracking bracket system
Product advantages
Technical Parameters
| Product name | Flat single-axis tracking bracket system FX-TB I |
| Installation Location | Desert, plain, mountain |
| Installation angle | Horizontal axis, north-south direction |
| Tracking angle and range | -60°-60° |
| Control system | PLC control, frequency converter drive, using tilt sensor feedback |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | cement pouring, spiral ground pile |
| Bracket material | Hot dip galvanized, zinc aluminum magnesium, stainless steel |
| Applicable life | 25 years |
Flexible bracket system
Product advantages
Large span
The large-span design of nearly 40m is suitable for high-rise photovoltaic projects such as agricultural photovoltaic and fishery photovoltaic and can reduce the number of pile foundations to as low as
90-100 piles per megawatt.
90-100 piles per megawatt.
Adapt to large inclination angles.
lt can achieve a larger inclination angle for the module and increase power generation capacity.
Easy to install
The tension adjustment of steel strands is realized through a special tension structure and threads.
Strong wind resistance
The lower floor adopts a unique double-cable, bell-mouth suspension structure, which effectively improves the overall ability to resist horizontal wind load forces. The front and rear truss connections as well as the upper and lower double-layer cable structures, effectively reduce the overhang ratio and lift of large-span structures. The overall wind resistance of the bracket has been significantly reduced.
Lower cost
By optimizing the structure, optimizing the layout of steel strands, etc, while reducing the amount of pile foundations, the investment cost is reduced by 2 to 5% compared to traditional power stations.
Technical Parameters
| Product name | Flexible bracket system FX-FB I |
| Installation Location | Fishing ponds, sewage plants, complex mountains, barren slopes, etc. |
| Installation angle | 0-15° customized |
| Wind load | 42m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Single board horizonta/Single board vertical |
| Solar module installation method | Back lock installation |
| Applicable components | Compatible with all components |
| Installation base | Concrete pouring, spiral ground piles |
| Bracket material | Hot dip galvanized, zinc aluminum magnesium, stainless steel |
| Applicable life | 25 years |
Flat roof triangular bracket system
Product advantages
The excellent structural design makes on-site installation faster and can be used for different flat roof project installations. The battery panels have strong compatibility.
The tripod base structure can be freely installed on flat roofs and floors, and is firmly connected to cement foundations or steel foundations. The unique base structure uses materials to save costs and lower costs.
Meet the requirements for horizontal or vertical arrangement of components.
Single-row and double-row installation structures can be freely combined, as well as adjustable structures to meet customer needs to a greater extent.
Technical Parameters
| Product name | Flat roof triangular bracket system FX-FRI |
| Installation Location | Flat roofs of industrial plants, hospitals, schools, residences, etc. |
| Installation angle | 0-45°customized |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement piers, expansion bolts |
| Bracket material | Aluminum alloy, hot dip galvanized, zinc aluminum magnesium, stainless steel |
| Applicable life | 25 years |
Ballast bracket system
Product advantages
There is no need to penetrate the roof for installation, and there are three ballast methods to choose from, which can copy the matrix structure and reduce the ballast weight of the system.
There are wind deflectors on both sides and back, which combined with matrix ballast can improve the wind resistance of the system.
Quick installation The fixture limit component can quickly assemble the connector without tools. improving installation efficiency.
The highly pre-assembled and tool-free assembly of connectors reduces the difficulty of on-site construction and greatly reduces costs.
There is no need to penetrate the roof, so there will be no injuries when installing the roof, and there is no need to worry about water leakage
Technical Parameters
| Product name | Ballast bracket system FX-FR Il |
| Installation Location | Flat roof, open flat land |
| Installation angle | 0-30°customized |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement foundation ballast |
| Bracket material | Aluminum alloy, stainless steel, hot dip galvanized, zinc aluminum magnesium |
| Applicable life | 25 years |
Metal roof triangle bracket system
Product advantages
The blocks and slots adopt a symmetrical design, and there is no direction requirement during installation, making it more convenient.
Technical Parameters
| Product name | Metal roof triangle bracket system FX-MR I |
| Installation Location | Industrial factory building, color steel tile roof |
| Installation angle | 0-45° customized |
| Wind load | 42m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Aluminum alloy clamp, double-head suspension bolt |
| Bracket material | Aluminum alloy. hot dip galvanized. zinc aluminum magnesium. stainless steel |
| Applicable life | 25 years |
Metal roof clamp system
Product advantages
-
The blocks and slots adopt a symmetrical design, and there is no direction requirement during installation, making it more convenient.
- The color steel tile clamp is used to fix the bottom to ensure the stability of the system;
- There are few installation spare parts and it is highly pre-assembled . No on-site cutting is required, which reduces the difficulty and time of on-site construction;
- Flexible adjustment on site, enabling vertical. east-west, southwest, and north-south adjustment.
Technical Parameters
| Product name | Metal roof clamp system FX-MR Ⅱ |
| Installation Location | Industrial factory building, color steel tile roof |
| Installation angle | Same angle as the roof |
| Wind load | 42m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Aluminum alloy clamp |
| Bracket material | Aluminum alloy. stainless steel |
| Applicable life | 25 years |
Metal roof hanger bolt bracket system
Product advantages
- Suitable for corrugated or trapezoidal metal roofs
- Our L-foot boom bolts and rails allow for a quick and easy installation process.
- Made of high-quality AL6005-T5 aluminum (surface anodized), which has corrosion resistance and anti-rust properties.
- Rubber gasket helps prevent rainwater penetration.
- Vertically adjustable.
- Can be firmly locked on wooden rafters or steel purlins.
Technical Parameters
| Product name | Metal roof hanger bolt bracket system FX-MR Ⅲ |
| Installation Location | Industrial factory building, color steel tile roof |
| Installation angle | Same angle as the roof |
| Wind load | 42m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Stainless Steel Suspension Stud Bolts |
| Bracket material | Aluminum alloy. stainless steel |
| Applicable life | 25 years |
Tile roof hanger system
Product advantages
- Compatible with all types of photovoltaic solar panels;
- A variety of roof hooks are suitable for different tile roofs, such as ceramic tiles, Spanish tiles, flat tiles, slate tiles and glazed tiles;
- Custom designed tile hooks to specific tile specifications;
- No need to drill holes in the tiles;
- High degree of pre-assembly makes on-site installation easy. There are many types of hooks and strong optionality.
- Rich options can correspond to various roof structures
- Various mounting metal parts can correspond to various roof structures
Technical Parameters
| Product name | Tile roof hanger system FX-TR I |
| Installation Location | Residential tile roof structure |
| Installation angle | Same angle as the roof |
| Wind load | 42m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Hook up |
| Bracket material | Aluminum alloy, stainless steel, hot dip galvanized |
| Applicable life | 25 years |
Photovoltaic building integration system
Product advantages
- Photovoltaic panels and drainage channels form structural waterproofing. It is easy to install and can be used directly as a roofing material instead of colored steel tiles.
- Most of the brackets are pre-assembled in the factory. No cuting or welding is required on site. Installatior can be completed by simply tightening the bolts. The construction is quick, and subsequent maintenance is convenient.
- lt saves the cost of roof laying and renovation, greatly reduces construction costs, extends the service life of the roof to more than 25 years, is waterproof and heat-insulated, and adds double protection.
- The arrangement of the system can be flexibly adjusted according to the actual situation of the building which can improve indoor brightness, enhance lighting, and perfectly integrate with the building, giving the building a high-end appearance.
Technical Parameters
| Product name | Photovoltaic building integration system FX-BPⅠ |
| Installation Location | Carports, greenhouses, industrial plants, etc. can be used instead of roofs |
| Installation angle | Same angle as the roof |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement piers, spiral ground piles, concrete pouring, expansion bolts |
| Bracket material | Stainless steel, hot dip galvanized, zinc aluminum magnesium |
| Applicable life | 25 years |
Carport single-pole system
Product advantages
- Strong adaptability to the environment and high power generation efficiency. Suitable for different ground environments.
-
Professional structural design
To ensure the overall stability and strength of the system, prefabrication is completed in the factory, and installation only requires fasteners to be fixed and spliced on site to complete the installation. -
Adopt single column structure design
Multiple angle adjustments can be achieved according to the prefabricated adjustment holes -
Fully compatible with different photovoltaic modules
Various types of photovoltaic modules can be supported freely and flexibly.
Technical Parameters
| Product name | Carport single-pole system FX-CS I |
| Installation Location | Self-use, factory area, public parking lot |
| Installation angle | 0-30°customized |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement pouring, spiral ground piles |
| Bracket material | Hot-dip galvanizing, zinc aluminum magnesium |
| Applicable life | 25 years |
Carport double-pole system
Product advantages
- There is no directional requirement during installation to improve installation efficiency.
- Highly pre-assembled to save installation time
- There are few installation spare parts and it is highly pre-assembled in the factory. No on-site cutting or drilling is required, which reduces the dificulty and construction time of on-site construction and greatly reduces the project cost.
- According to the terrain structure design, vertical, east-west, southwest, and north-south adjustments can be realized to simplify installation and maximize photovoltaic power generation.
- More stable and solid structural design
Technical Parameters
| Product name | Carport double-pole system FX-CD I |
| Installation Location | Self-use, factory area, public parking lot |
| Installation angle | 0-30°customized |
| Wind load | 60m/s |
| Snow load | 1.6KN/m2 |
| Arrangement of solar modules | Horizontal/Vertical |
| Applicable components | Compatible with all components |
| Installation base | Cement pouring, spiral ground piles |
| Bracket material | Hot-dip galvanizing, zinc aluminum magnesium |
| Applicable life | 25 years |