FIXDEX-Goodfix la taaban karo-Barroosinno galvanized
Iskuxidhka la taaban karo-Barroosinno galvanized
Akhri wax dheeraad ah:Buulasha la taaban karo
boolal la taaban karo description alaabta
1. Isticmaalka dunta lagu gooyo gidaarka daloolka ee alaabta salka, buuxi barkinta.
2. adkaanta dusha sare, qurux badan oo saaxiibtinimo leh
3. Barroosinno waxqabad sare leh oo u hoggaansama heerka JG160-2017 ee "Barroosinnada makaanikada ee la taaban karo"
tapcon shubka waxay kuxirtaa faa'iidooyinka alaabta
1, Edae goyntu waxay ka samaysan tahay walxo dhaadheer si loo hubiyo in duntu ay si habsami leh u goyn karto daloolka.
derbiga alaabta salka.
2. Barroosinadu waxay ka samaysan yihiin maaddooyin u adkaysta xidhashada iyo dib loo isticmaali karo
3. Rakibaadda iyo adkaynta ayaa lagu dhamayn karaa hal mar, iyadoo la ilaalinayo wakhtiga dhismaha
4. Cadaadis fidineed oo yar, oo awood u siinaya in lagu rakibo geeso yaryar iyo spacinq.
5. Gebi ahaanba la go'i karo, gaar ahaan ku habboon hagaajinta ku meel gaarka ah
boolal tapcon baaxadda lagu dabaqi karo
1. Hagaajinta dayrarka, tuubooyinka, iwm.
2. hagaajin ku meel gaar ah inta lagu jiro dhismaha dayactirka degdega ah
3.Anchorage ee darbiyada dahaarka ee dibadda
galvanizedIskuxidhka la taaban karoHalbeegyada Rakibaadda Bolts
| Tilmaamaha alaabta | Dhererka alaabta | Dhererka qodista dhexroorka (mm) | Qoto dheer h (mm) | Qoto dheer ee aaska hnom (mm) | Dhumucda barroosinka thx (mm) | Aperture barroosin d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
bolt hex madaxa furka galvanized Halbeegyada farsamada
| Tilmaamaha alaabta | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Qoto dheer ee aaska hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Dhumucdiisuna waxay yar tahay hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| shubka aan dillaacin | Kacsan (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Ciidanka Shearing (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Ugu yaraan Cmin (mm) | 65 | 80 | 100 | 115 | |
| Kala dheeraynta min Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm shubka dillaacsan | Kacsan (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Ciidanka Shearing (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Ugu yaraan Cmin (mm) | 65 | 80 | 100 | 115 | |
| Kala dheeraynta min Smin (mm) | 50 | 60 | 75 | 85 | |
