FIXDEX-Goodfix Concrete Screw-Anchors galvanized
Kankare dunƙule-Anchors galvanized
Kara karantawa:Katalogi Kankare sukurori
kankare sukurori samfurin bayanin
1. Yin amfani da zaren yankan cikin bangon rami na kayan tushe, kammala ƙaddamarwa.
2. High surface taurin, kyau da eco-friendly
3. Ƙwararren ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ma'auni na JG160-2017 na "Mechanical Anchors for Concrete"
tapcon kankare anga amfanin samfurin
1, An yi yankan edae da kayan ɗorewa don tabbatar da cewa zaren zai iya yanke cikin rami da kyau.
bangon kayan tushe.
2. An yi su an yi su ne da kayan da ba su da ƙarfi kuma ana iya sake amfani da su
3. Ana iya kammala shigarwa da matsawa a cikin tafiya ɗaya, yana adana lokacin gini
4. Ƙananan haɓaka haɓakawa, kunna shigarwa tare da ƙananan gefuna da spacinq.
5. Cikakken m, musamman dacewa don gyarawa na wucin gadi
tapcon sukurori da aka zartar
1. Gyara shinge, bututu, da dai sauransu.
2. Gyaran wucin gadi yayin ginin gyaran gaggawa
3.Anchorage na waje bango rufi bangarori
GalvanizedKankare dunƙuleMatsalolin Shigarwa na Bolts
| Bayani dalla-dalla | Tsawon samfur | Diamita Diamita (mm) | Haɗa zurfin h (mm) | Zurfin binne hnom (mm) | Kauri Anchor thx (mm) | Anchor Aperture d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
galvanized hex head dunƙule aronji sigogi na fasaha
| Bayani dalla-dalla | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Zurfin binne hnom (mm) | 65 | 6585 | 85 100 | 100125 | |
| Min substrate kauri hmin (mm) | 120 | 120 160 | 130 160 | Farashin 160210 | |
| Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Siminti mara fashewa | Tashin hankali (KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Ƙarfin Shearing (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min tazarar Cmin (mm) | 65 | 80 | 100 | 115 | |
| Min tazarar Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm fashe kankare | Tashin hankali (KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Ƙarfin Shearing (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min tazarar Cmin (mm) | 65 | 80 | 100 | 115 | |
| Min tazarar Smin (mm) | 50 | 60 | 75 | 85 | |
