sekoti sa konkreite sa tšepe e sa hloekang
sekoti sa konkreite sa tšepe e sa hloekang
Bala haholoanyane:Catalog Likurufu tsa Konkreite
liankora tsa konkreite tse se nang tšepeTlhaloso ea Sehlahisoa
1. U sebelisa likhoele tse sehang leboteng la lesoba la thepa ea motheo, tlatsa anchoring.
2. Ho thatafala holimo holimo, e ntle le eco-friendly
3. Li-ankora tse sebetsang hantle tse lumellanang le maemo a JG160-2017 a "Mechanical Anchors for Concrete"
liboutu tsa konkreite tse se nang tšepemelemo
1, The cutting edae e entsoe ka thepa e phahameng-strenath ho netefatsa hore khoele e ka khaola hantle ka mokoting.
lerako la thepa ea motheo.
2. Li-ankora li entsoe ka thepa e sa sebetsaneng le ho sebelisoa hape
3. Ho kenya le ho tiisa ho ka phethoa ka nako e le 'ngoe, ho boloka nako ea kaho
4. Khatello e nyenyane ea ho atolosa, e nolofalletsang ho kenya ka mahlakoreng a manyenyane le spacinq.
5. E ka senyeha ka ho feletseng, haholo-holo e loketseng ho lokisoa ka nakoana
Sekoti sa konkreite sa 316 sa tšepe e sa hloekang se sebetsang
1. Ho lokisa terata, liphaephe, joalo-joalo.
2. Ho lokisoa ha nakoana nakong ea kaho ea tokiso ea tšohanyetso
3.Anchorage ea liphanele tsa ka ntle tsa marako tse sireletsang marako
liankora tsa konkreite tse se nang tšepe Mekhahlelo ea ho kenya
| Litlhaloso tsa sehlahisoa | Bolelele ba sehlahisoa | Drill Diameter ho fihla ho (mm) | Botebo ba ho cheka h (mm) | Botebo ba lepato hnom (mm) | Anchor Thickness thx (mm) | Anchor Aperture d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
stainless steel tapcon screws Mekhatlo ea tekheniki
| Litlhaloso tsa sehlahisoa | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Botebo ba lepato hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Botenya ba substrate e nyane hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Konkreite e sa petsohang | tsitsipano(KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Sesole sa ho kuta(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| moeli o monyenyane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Sekhechana se senyenyane Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm konkreite e petsohileng | tsitsipano(KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Sesole sa ho kuta(KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| moeli o monyenyane Cmin (mm) | 65 | 80 | 100 | 115 | |
| Sekhechana se senyenyane Smin (mm) | 50 | 60 | 75 | 85 | |
