Countersunk musoro Stainless simbi kongiri sikuruu
Countersunk musoro Stainless simbi kongiri sikuruu
Verenga Zvimwe:Catalog Concrete screws
simbi isina tsvina kongiri sikuruu mabhaudhirondedzero yechigadzirwa
1. Uchishandisa tambo kucheka mugomba madziro echigadziko, zadzisa anchoring.
2. Kuoma kwepamusoro kwepamusoro, kwakanaka uye eco-friendly
3. High-performance anchors inoenderana neJG160-2017 standard ye "Mechanical Anchors for Concrete"
316 simbi yekongiri sikuruuzvakanakira
1, Iyo yekucheka edae inogadzirwa nepamusoro-strenath zvinhu kuti ive nechokwadi chekuti shinda inogona kuchekwa mugomba zvakanaka.
rusvingo rwezvinhu zvepasi.
2. Zvibatiso zvinogadzirwa nezvinhu zvinopfeka uye zvinogona kushandiswa zvakare
3. Kuisa nekusimbisa kunogona kupedzwa mune imwe chete, kuchengetedza nguva yekuvaka
4. Kushungurudzika kuduku kwekuwedzera, kugonesa kuiswa nemakona maduku uye spacinq.
5. Yakakwana zvachose, kunyanya yakakodzera kugadzirisa kwenguva pfupi
Stainless simbi kongiri screw anchorschiyero chinoshanda
1. Kugadzirisa fenzi, mapaipi, nezvimwe.
2. Kugadziriswa kwekanguva panguva yekugadziriswa kwekukurumidzira kuvaka
3.Anchorage yekunze kwemadziro ekudzivirira mapurisa
titen Stainless simbi kongiri screws Installation parameters
| Product specifications | Product urefu | Drill Diameter kuita (mm) | Dhora kudzika h (mm) | Hudzamu hwekuvigwa hnom (mm) | Anchor Hukobvu thx (mm) | Anchor Aperture d (mm) |
|---|---|---|---|---|---|---|
| M8 | 70-130 | 8 | 80-140 | 65 | 5-65 | 12 |
| M10 | 70 | 10 | 80 | 65 | 5 | 14 |
| M10 | 90-260 | 10 | 100-270 | 85 | 5-175 | 14 |
| M12 | 90 | 12 | 100-270 | 85 | 5 | 16 |
| M12 | 110-150 | 12 | 120-160 | 100 | 10-50 | 16 |
| M14 | 110 | 14 | 120 | 100 | 10 | 18 |
| M14 | 135-160 | 14 | 170 | 125 | 10-35 | 18 |
tapcon Stainless simbi kongiri screws Technical parameters
| Product specifications | M8 | M10 | M12 | M14 | |
|---|---|---|---|---|---|
| Hudzamu hwekuvigwa hnom (mm) | 65 | 65 85 | 85 100 | 100 125 | |
| Min substrate ukobvu hmin (mm) | 120 | 120 160 | 130 160 | 160 210 | |
| Tinst max (Nm) | ≤20 | ≤40 | ≤60 | ≤80 | |
| Kongiri isingatseki | Makakatanwa(KN) | 14.88 | 11.86 19.17 | 14.28 19.96 | 19.17 29.82 |
| Simba rekuveura (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min muganho Cmin (mm) | 65 | 80 | 100 | 115 | |
| Min spacing Smin (mm) | 50 | 60 | 75 | 85 | |
| 0.3 mm kongiri yakatsemuka | Makakatanwa(KN) | 8.81 | 8.33 13.48 | 10.04 14.03 | 13.48 20.96 |
| Simba rekuveura (KN) | 8.93 | 13.95 | 21.97 | 31.08 | |
| Min muganho Cmin (mm) | 65 | 80 | 100 | 115 | |
| Min spacing Smin (mm) | 50 | 60 | 75 | 85 | |
