EN/CN    FIXDEX Global    Press    Contact Register  | Login  
You are here:  Home>>PRESS > Staff center >

Font Size:big  middle  small

What are the characteristics and the usage method of resin capsule

Number of visits: Date:2020-01-17

FIXDEX main products are wedge anchor,chemical anchor,thread rod,drop in anchor,sleeve anchor,shield anchor,heavy duty anchor and screws.Then resin capsuleIt has the advantages of high bonding strength, similar to embedded, curing at room temperature, small shrinkage in hardening process, good temperature resistance, welding after embedding steel bar, durability, weather resistance, aging resistance, resistance to medium (acid, alkali and water), good toughness and impact resistance after curing, no volatile solvent, no toxicity and environmental protection, and A, B group dispensing glue ratio is wide and construction is convenient.
resin capsule characteristic

  1. Room temperature curing, high strength, strong adhesion and good durability.
  2. Aging resistance and acid and alkaline resistance.
  3. Excellent water and other media resistance.
  4. The proportioning ratio of components a and B is wide and convenient for field operation.
  5. As embedded, post reinforcement has superior load displacement characteristics.
  6. It has good heat resistance and can be welded after embedding reinforcement.
resin capsule usage method
Key points of planting reinforcement and screw construction:
  1. Drill holes according to regulations → clean holes with brush and air cylinder → mix groups A and B evenly → prepare rebar planting glue according to proportion and mix fully → inject glue into holes with special tools → rotate rebar or screw into holes → solidify → quality inspection
  2. According to the engineering design requirements, drill holes at corresponding positions in the base material (such as concrete), and the hole diameter, hole depth and reinforcement diameter shall be determined by professional technicians or field tests.
  3. Use a special air cylinder, brush or compressed air machine to clean the dust in the hole. It is recommended to repeat it for at least 3 times. There should be no dust and open water in the hole.
  4. The surface of reinforcement shall be derusted and wiped clean with acetone or alcohol.
  5. Mix components a and B in 2:1 proportion until they are completely uniform, and then inject them into the borehole.
  6. Insert the reinforcement into the bottom of the hole by rotation to ensure that the orifice overflows and pay attention to prevent leakage. Whether the rubber layer is full will directly affect the anchoring force.
  7. during the curing process, the anchorage was prevented from disturbance, and the gel was completely cured at room temperature for 1-2 days.
  8. Visually check whether the curing is normal. The planting reinforcement of important parts shall be subject to the field pull-out test to check whether its anchoring force meets the design requirements; the construction of the next process can only be carried out after it is qualified.
Which brand is good of resin capsule?
FIXDEX IS ONE OF THE BIGGEST AND THE MOST PROFESSIONAL MANUFACTURER OF SCREWS AND ANCHORS
IN ASIA.Our main products are wedge anchor,chemical anchor,thread rod,drop in anchor,sleeve anchor,shield anchor,heavy duty anchor and screws.select FIXDEX,is Strong, durable and safe.




TypeInfo: Staff center

Keywords for the information: wedge anchor chemical anchor

wechat

wechat

FIXDEX sales manager

Phone

Phone

+86 18002570677
(7*24)

WhatsApp

WhatsApp

+86 18002570677

message

message